Keepers and Stops

Bathroom Partition Keeper Bumpers and Stops

All keeper bumpers and stops are in stock for fast delivery. We carry in stock chrome plated, cast stainless steel and aluminum partition keeper bumpers. Replacing old hardware with new will change your bathroom's to looking new again. All partition keeper bumpers will come with security screws. All throw latch keepers are required for all handicap doors over 32", 34", 36" width for easy access to the inside door.

RBA Partitions and Parts Catalog

View as Grid List

Items 1-36 of 91

per page
Set Descending Direction
Page
  1. Global Keeper Bumper Concealed

    Global Toilet Partition Keeper Bumper For Concealed Latches 1-1/4" Round Edge Post

    Polished chrome plate Zamac die casting construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5510. Globals manufacturer part number 40-8511530.

    Shipped with mounting screws.

    9G150C
    $7.40
  2. Keeper For Throw Latch

    Toilet Partition Keeper For Throw Latch Inswing Flat

    Polished chrome plated Zamac construction. Keeper base is 2-1/2" high by 1-3/16" wide with a 1-1/2" hole spacing. Strike is 2-1/2" tall by 7/8" deep. The material 1/8" thick. The slot is 13/16" high by 1/4". Also known as a Bathroom Stall Keeper Inswing Flat. Manufacture part # 5180.

    Shipped with mounting screws.

    9S2701
    $5.12
  3. Sanymetal Door Stop

    Sanymetal Partitions Door Stop For Inswing/Outswing Flat

    Polished chrome plated Zamac construction. The strike and keeper measure 2-1/2" high by 1-7/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5170.

    Shipped with mounting screws.

    9S2704
    $5.69
  4. Bobrick Keeper Bumper Inswing

    Bobrick Toilet Partition Keeper Bumper For 1" Inswing Square Edge Post

    Polished chrome plate Zamac die casting construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. The slot is 5/16" deep by 1-1/2" high. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing 1". Manufacture part # 5620.

    Shipped with mounting screws.

    9A5620
    $13.28
  5. Bobrick Keeper Bumper For 1" Outswing Sq Edge

    Bobrick Toilet Partition Keeper Bumper For 1" Outswing Square Edge Post

    Polished chrome plate Zamac die casting construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Outswing 1". Manufacture part # 5720.

    Shipped with mounting screws.

    9A5720
    $10.12
  6. Bobrick Inswing Keeper Bumper For Throw Latch For 1" Sq Edge

    Bobrick Toilet Partitions Inswing Keeper Bumper For Throw Latch For 1" Sq Edge Post

    Polished chrome plated Zamac construction. The strike and keeper is 2-1/2" tall by 1-15/16" wide. The mounting holes are 1-1/2" on center. The stop is 2-1/2" tall by 13/16" projection with a rubber insert. The two slots are 5/16" deep by 13/16" high. Also known as Bathroom Stall Strike and Keeper Inswing 1". Manufacture part # 5820.

    Shipped with mounting screws.

    9A5820
    $10.12
  7. Fiat Keeper Bumper For 1-1/4" Inswing Sq Edge

    Fiat Toilet Partitions Keeper Bumper For 1-1/4" Inswing Sq Edge Pilaster Or Post

    Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5110

    Shipped with mounting screws.

    9F0304
    $8.50
  8. Fiat Keeper Bumper Out Swing for 1-1/4"

    Fiat Partitions Keeper Bumper For 1-1/4" Outswing Square Edge Pilaster Or Post

    Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for outswinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5210

    Shipped with mounting screws.

    9F0303
    $8.50
  9. Inswing Keeper For Throw Ltc For 1-1/4" Sq Post

    Inswing Partition Keeper Bumper For Throw Latch For 1-1/4" Sq Post

    Zamac die cast and polished chrome plate construction. The strike and keeper measure 2-1/2" high by 1-7/8" wide with a hole spacing of 1-1/2" on center. The stop is 2-1/2" tall by 3/4" wide with a rubber insert. The slot measures 13/16" high by 1/4" deep. Commonly known as a Bathrrom Stall Strike and Keeper Inswing 1-1/4". Manufacture part # 5340

    Shipped with mounting screws.

    9S410T
    $8.67
  10. Fiat Keeper Bumper Concealed

    Fiat Partitions Keeper Bumper Concealed And Strike For Concealed Latches Inswing/Outswing 1-1/4"

    Zamac die cast and polished chrome plate construction. Keeper is 1-1/4" tall by 2-3/8" wide by 1-3/4" deep. The strike is a1/2" thick and the slot is 7/16" deep. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5960

    Shipped with screws for mounting.

    Same as the 9S8861

    9F0227
    $7.08
  11. Mills Keeper Bumper Concealed

    Mills Toilet Partition Keeper Bumper For Concealed Latches 1-1/4" Round Edge Post

    Polished chrome plate Zamac die casting construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5590.

    Shipped with mounting screws.

    90T317
    $6.33
  12. Comtec In Swing Flat Stop 6"

    Comtec Toilet Partitions In Swing Flat Stop 6"

    Clear anodized aluminum construction. The strike and keeper is 6" tall by 2-9/16" deep and 3/4" thick on the stop. The material is 1/8" thick. The mounting holes are 3" on center. And the locking slot is 1-1/2" high by 3/8" deep. Also known as a Bathroom Stall Strike and Keeper-In Swing Flat. Manufacture part # 5798.

    Shipped with mounting screws.

    Aluminum 6" in swing flat stop keeper, for wall mount. 5798
    9A5798
    $17.71
  13. Comtec Outswing Flat Stop 6"

    Comtec Out Swing Flat Stop 6"

    Clear Anodized aluminum construction. The strike and keeper is 6" tall by 1-5/8" deep by 1/8" thick. The stop is 9/16" deep by 3/4" wide with a rubber insert. The mounting holes are 3" on center. Also known as a Bathroom Stall Flat Backed for Wall Mounting Strike and Keeper. Manufacture part #5898.

    Shipped with mounting screws.

    9A5898
    $17.71
  14. Aluminum Privacy Strip 60"

    • Partition Door Privacy Strip are aluminum construction
    • 1-1/8" x 60" ht.
    • Also known as 121974.
    • Partition Door Privacy strips are designed to eliminate any gaps between door and pilaster. Add your own self threading screws to complete the job, includes 1 privacy strip
    • This product ships in an oversize box ground.
    9A1219
    $8.25
  15. Global SS Door Keeper for Current Latch

    Current style Global stainless steel door catch includes screws for mounting. This is used with the 9g700 latch in ss. Product part number is 8262360. This part has a 3/8" gap for the catch and is 2-1/8" in length, 1-5/8" hole spacing and is 3/4" wide. 

    9G755
    $18.70
  16. Global Door Keeper for Current Latch

    Current style Global chrome plated door catch includes screws for mounting. This is used with the 9g600 latch in ss. Product part number is 40-8212360. This part has a 3/8" gap for the catch and is 2-1/8" in length, 1-5/8" hole spacing and is 3/4" wide. 

    9G711
    $13.42
  17. Aluminum Privacy Strip 72"

    • Partition Door Privacy Strip are aluminum construction
    • 1-1/8" x 72" ht.
    • Also known as 121975.
    • Partition Door Privacy strips are designed to eliminate any gaps between door and pilaster. Add your own self threading screws to complete the job, includes 1 privacy strip
    • This product ships in an oversize box ground.
    9A1272
    $9.40
  18. Continuous Door Stop for 1-1/4" Pilaster

    Toilet partition continuous door stop for powder coated steel partitions, this has a slight round edge for attaching. The length is 57" and is used on a 1-1/4" slight round edge pilaster for mounting. Used with 1" doors and has a concealed turn latch with the pin coming out the center edge of the door. The hole spacing for the slot is 28-1/2" dead center of unit. The slot for the bolt to lock to is 7/16" wide x 5/8"ht. This helps with blocking the door gaps on the locking side of the door. This is made of brushed aluminum material and is used with in or out swing doors. Also known as Hadrian partitions part number 560058.

    9A560058
    $95.00
  19. Bobrick Inswing Keeper

    Bobrick inswing keeper for door latch. Also known as 1040-35. Used with slide latch for assembly

    1040-35
    $17.71
  20. Comtec Aluminum 6" Inswing Strike And Keeper For 1" Post

    Comtec Toilet Partition Aluminum 6" Inswing Strike And Keeper For 1" Post Or Pilaster

    Clear Anodized aluminum construction. Strike and Keeper is 6" high by 1-15/16" wide. The three mounting screws are 2" on center apart. The slot is 3/8" deep by 1-1/2" high. Also known as a Bathroom Stall Strike and Keeper Inswing 1". Used mostly on Solid Plastic (HDPE) Toilet Parttions. Some manufacture part #'s are 5778, HSISA, and 650-2873.

    Shipped with mounting screws.

    9HSISA
    $15.18
  21. Mills Keeper Bumper Surface Mount

    Mills Keeper Bumper 1-5/8" Between Screws, Surface Mount For Round Edge Posts

    Polished chrome plated Zamac die casting. The strike and keeper measure 2-1/4" high by 29/32" wide and 15/16" deep. The hole spacing is 1-5/8" on center. Also known on Bathroom Stall Strike and Keeper Inswing/Outswing 1-1/4". Manufacture part # 5550.

    Shipped with mounting screws.

    90T316
    $13.56
  22. Chrome Plated Keeper Bumper Inswing Flat Stop

    Chrome Plated Toilet Partition Keeper Bumper Inswing Flat Stop

    Chrome plated Zamac die casting. The strike and keeper measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick. The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-19/32" on center. Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5140

    Shipped with mounting screws.

    90T116
    $7.00
  23. Hinge Sightline Filler for Partition Door Gaps

    Toilet partition door hinge side sightline filler for 1-1/4" thick powder coated steel pilaster post. This product has a slight round edge specifically for this material. The demensions are 1-1/4"x 54-1/2", this product is brushed aluminum and can be cut in the field. This product will help block the gap on the toilet partition hinge side. Known as 560458 from Hadrian partitions and can be used with other factories.

    9A560458
    $85.00
  24. Bobrick Outswing Keeper

    Bobrick outswing keeper for door latch. Also known as 1040-36, 7729. Used with slide latch. Hole spacing is 1-1/2".

    1040-36
    $35.42
  25. Comtec Aluminum 6" Outswing Keeper Bumper For 1"

    Comtec Toilet Partition Aluminum 6" Outswing Strike And Keeper For 1" Post Or Pilaster

    Clear Anodized aluminum construction. Strike and Keeper is 6" high by 1-15/16" wide. The three mounting screws are 2" on center apart. Also known as a Bathroom Stall Strike and Keeper outswing1". Used mostly on Solid Plastic (HDPE) Toilet Parttions. Known as 5878.

    Shipped with mounting screws.

    9HSOSA
    $15.18
  26. Bobrick Flat Mount Keeper

    Bobrick flat mount keeper for door latch. Also known as 1040-39. Used with slide latch for assembly

    1040-39
    $24.04
  27. Full Length Door Stop for 3/4" Material

    Full length aluminum door stop for 3/4" material used with phenolic commercial toilet partitions or posts that are 3/4" thick. This product will help any gap from the front view of the toilet stall door on the latch side. For an out swing door the slide bolt latch locks onto the opposite side of the bumper. For an in swing door the kit comes with a simple stainless steel keeper that is mounted on the inside of the stall on the post for the latch to lock to. This kit is used for an inswing or an outswing door. The spec sheet is attached, the overall height is 53-1/2". The product is made by Global Partitions with part numbers 40-8454500 and 40-8262370.

    9A8454500
    $51.00
  28. General Keeper Bumper Concealed

    General Toilet Partition Keeper Bumper For Square Edge 1-1/4" Thick Posts

    Zamac die cast construction and polished chrome plated. The keeper and strike is 2-1/2" tall by 1-7/8" wide. The stop is 17/32" thick and projects out 3/4". The mounting holes are 1-1/2" on center. The locking slot is 7/16" deep. Generally used with concealed latches. Also known as a Bathroom Stall Strike and Keeper - Inswing/Outswing 1-1/4". Manufacture part # 5230.

    Shipped with mounting screws.

    92560E
    $9.30
  29. Cast SS Inswing Surface Keeper 1-1/2" Screws

    Partition Inswing Surface Keeper 1-1/2" Between Screws Cast Stainless Steel

    Cast stainless steel construction. The keeper base is 2-1/2" tall by 1-3/32" wide. The latch face measures 2-1/2" tall with a 7/8" projection. The hole spacing is 1-1/2". The slot measures 5/16" by 1-9/16". Also known as a Bathroom Stall Keeper-Inswing Flat. Manufacture part # 5163.

    Shipped with mounting screws.

    9A5163
    $13.80
  30. Cast SS Keeper Bumper For 1" Sq Post Outswing

    Partition Keeper Bumper For 1" Square Post Outswing Cast Stainless Steel

    Cast stainless steel construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Outswing 1". Manufacture part # 5723.

    Shipped with mounting screws.

    9A5723
    $18.04
  31. Keeper Bumper- Outswing For 1-1/4" Sq Edge

    Keeper Bumper- Outswing For 1-1/4" Sq Edge Chrome Plated Construction

    Used on many toilet partition manufacturers partitions, known as 40-8512354.

    9A2354
    $11.39
  32. Full Length Door Stop for 1" Material

    Full length aluminum door stop for 1" material used with solid plastic commercial toilet partitions or posts that are 1" thick. This product will help any gap from the front view of the toilet stall door on the latch side. For an out swing door the slide bolt latch locks onto the opposite side of the bumper. For an in swing door the kit comes with a simple stainless steel keeper that is mounted on the inside of the stall on the post for the latch to lock to. This kit is used for an inswing or an outswing door. The spec sheet is attached, the overall height is 53-1/2". The product is made by Global Partitions with part numbers 40-8464400 and 40-8262370.

    9A8464400
    $53.00
  33. Cast SS Keeper Bumper For 1-1/4" Sq Post Outswing

    Partition Keeper Bumper For 1-1/4" Square Post Outswing Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for outswinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5213.

    Shipped with mounting screws.

    9A5213
    $19.00
View as Grid List

Items 1-36 of 91

per page
Set Descending Direction
Page